Search results

Have a look at http://www.lto.org/newsite/index.html and http://www.ultriumlto.com/ - proprietary issues solved. With my Tandberg I can go cross platform and cross backup package, as long as the backup program is LTO capable. I would hate to try and backup 2TB of data on 8 or even 50GB media...

You were right, when I booted up w2k3 without the drives attached it noted them as missing in Disk Management. I then re-cabled the lot and the spanned disk pair was recognised on reboot. Perhaps it was dumb luck that I managed to cable them correctly or otherwise w2k3 knew what to do with the...

Thx for the advice. I spanned as a temporary measure, bought a Tandberg 420LTO on Friday to backup the data and kill the span. In my infite wisdom I got ahead of myself. I'm going to boot using a Knoppix livecd first to see wheter I can discern the non-spanned drives from the spanned pair...

I have 5 identical Hitachi 400GB SATA hard drives installed in one of my PCs' running Windows Server 2003, SP1. Two of these drives are spanned to form one logical drive letter. I've not had any problems with the spanned volume, however, whilst installing a SCSI card to install a tape backup...

Ok, I understand where you're coming from. What would you suggest I do to get the offline drives online on occasion to facilitate a backup? Is there some sort of housing I could purchase to hook them up via as the idea of opening a case periodically to unhook other drives, cable drives for...

Aah, but you miss the point, the possibilities and playlists are endless. If you're a music lover you'd understand. Besides, CDs are going the way of the dinosaur, it's just a matter of time...

ACK! Understood :eekers:

Based on my experience I figure add-in RAID cards are usually easier to source than replacement mobos with the same chipsets as an earlier mobo Could you explain your reasoning - if I'm going down an unsuitable path then now is the time for me to find out...

Your point is noted, however, I'm going to be driving the music library using Squeezebox 2 - http://www.slimdevices.com/ , which makes ripping CDs a necessity. Whilst it is monotonous, with a fast PC, EAC and an Internet connection, it is quite painless - just throw in a CD whenever you walk by...

Agreed, the mobo does support R5, however, I've been burned before relying on on-board raid chipsets and not being able to get to the data after a mobo failure. The RAID5 solution is attractive because it's a "set and forget" solution - will safeguard my data unless I have a power surge or...

Because I'm in the process of ripping over 1,200 cd's (owned) to FLAC format for a music jukebox and backing all that up doesn't seem cost effective..?

The motherboard spec can be viewed here: http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=AW8-MAX&fMTYPE=LGA775 It offers the following PCI slots: * 1 x PCI-E X16 slot, 2 x PCI-E X1 slots * 2 x PCI slots

I recently assembled a new PC using an Abit AW8-MAX motherboard and am looking for a compatible RAID controller to run 4 x 400GB SATAII drives in a RAID5 config. Looking at the Adaptec, Promise and 3Com solutions all seem to support server boards rather than desktops. Any ideas ?

I'll give your suggestion a go, but I think the most sensible answer is what you suggest - disable the on board controllers and get a 3ware controller(s) to handle all devices. One question though: does running all drives through a slot in PCI card reduce performance compared with the on-board...

Thanks for referencing the article - it was the first thing I read and investigated before I made my initial post. SATA3 and 4 are treated as SCSI devices, however I'm not sure the SATA1 and 2 on the ICH5 are treated in the same manner. The more I work this through the more I'm convinced it is...

I've installed the latest Intel and ABIT supplied SI drivers. All devices are recognised etc, there are no problems with ny of the devices being recognised by the OS.

I'm using the on-board ICH5, on-board Silicon Image SiI 3112 SATARaid Controller and a Promise FastTrak S150 TX2plus PCI based controller. Both on-board controllers are set to SATA only ie I'm not using their RAID capability. The PCI Promise controller only has ATA drives connected at present...

I've now exhausted all options including going down this path - see my comments re SATA 3 and 4 channels after your post.

The two drives in question are running off SATA3 and SATA4 on my motherboard. Those two SATA channels are provided by a Silicon Image 3112 SATA Raid Controller (I have not turned on the raid capability). Selecting properties under either drive attached to these channels does not allow me to...

I've tried setting up the arrays with the Promise card and also with the on-board controller. I am also going to set both drives up independently using the SATA channel of the Silicon Image on-board chip and then try to copy to each just to see if there is a problem with either drive. Assuming...

I've tried setting up the arrays with the Promise card and also with the on-board controller. I am also going to set both drives up independently using the SATA channel of the Silicon Image on-board chip and then try to copy to each just to see if there is a problem with either drive. Assuming...

Hi. PC in question is running Windows Server 2003 (no service packs installed) and has a mixture of ATA and SATA drives installed. The motherboard is an ABIT IC7-G which provides 2 ATA channels (up to four devices), 2 SATA channels in the ICH5 chipset and an additional 2 SATA channels on a...