Over the last couple years I have collected a small army of stuff that I will likely never use again as everything seems to be on the motherboard now. Everything here was known to work fine when I pulled them (notes below) and I have good habits with grounding, static bags etc.
I buy/sell stuff all the time under the ID maxburn, but honestly I don't want to go through the work to list all this stuff considering the little money involved. You can check my feedback and contact me through ebay, no scams here.
My email is scottjal(a)fastmail.us I do take paypal at that address.
By the way, on ebay now I am selling: ATI Radeon 9700 PRO 128MB Retail box kit item number 8742189478
**********Bundle $50 + your choice of shipping**********
ONE - 3Com 3C905TX 10/100Mbps RJ-45 PCI
TWO - 3C905C TXM ETHERLINK 10/100 PCI NIC FOR COMPLETE PC MANAGEMENT, 10/100Mbps RJ-45 PCI - These are not tested, should work fine, I bought them as a bundle of five system pulls and just never used these extras.
ONE - COMPAQ Dual Netelligent 10/100 TX PCI UTP. Regular PCI and has two 10/100 ports.
http://h18004.www1.hp.com/products/servers/networking/retired/dual/
ONE - Promise Fasttrak 100 (modded Ultra 100) PCI, RAID (0,1,0+1), Two PATA ports. Used this for a while to mirror my OS drive in the server, works great.
TWO - Alteon ACEnic Adapter 710025, (Similar to 3COM 710024) Gigabit, RJ45 copper, Jumbo frames up to 9k, 512k cache, 32/64-bit, 33/66 MHz PCI bus master, looks like this:
http://www.3com.com/other/downloads/infra/corpinfo/en_US/710024_ang_lo.jpg
General warning about these, those heatsinks are there for a reason and it throws some heat.
ONE - Matrox Millenium II PCI 4MB - Great add on for a second monitor, sharp picture.
ONE - ASUS P4C800-E Deluxe v2.0a. Intel 875P chipset, Intel CSA-based Gigabit LAN, Promise SATA RAID, 800 MHz FSB, Dual-Channel DDR400 Memory, Intel PAT, supports Prescot. MFG link:
http://www.asus.com/products4.aspx?modelmenu=2&model=175&l1=3&l2=12&l3=30
One warning about this board: I had problems with games locking up with it. Pretty sure it wasn't the video card or memory. You may have issues with it, I don't know. It never locked up in windows, passed memtest and I also looped 3dmark for hours without problems.
**********End of Bundle**********
Individual Items:
Processor $80: Pentium 4 2.8ghz 800FSB, SL6WT, Northwood 0.13 micron, Hyperthread - There are some bent pins on this CPU, nothing bad but it just won't fall perfectly into the socket, I bought it off ebay like that. Just took it out of my server yesterday, ran fine 24/7 for about a year.
Heatsink $15: Alpha PAL8942, for Pentium 4 Socket 478. Copper and aluminum construction, uses 80mm fan. All the little screws springs and plastic washers required for mounting are included. Heatsink has a couple bent fins and you can tell the hardware has been used a couple times, nothing to bad and will work fine. If you ask I will throw in a couple case fans, nothing special. http://www.alphanovatech.com/c_pal8942e.html
I buy/sell stuff all the time under the ID maxburn, but honestly I don't want to go through the work to list all this stuff considering the little money involved. You can check my feedback and contact me through ebay, no scams here.
My email is scottjal(a)fastmail.us I do take paypal at that address.
By the way, on ebay now I am selling: ATI Radeon 9700 PRO 128MB Retail box kit item number 8742189478
**********Bundle $50 + your choice of shipping**********
ONE - 3Com 3C905TX 10/100Mbps RJ-45 PCI
TWO - 3C905C TXM ETHERLINK 10/100 PCI NIC FOR COMPLETE PC MANAGEMENT, 10/100Mbps RJ-45 PCI - These are not tested, should work fine, I bought them as a bundle of five system pulls and just never used these extras.
ONE - COMPAQ Dual Netelligent 10/100 TX PCI UTP. Regular PCI and has two 10/100 ports.
http://h18004.www1.hp.com/products/servers/networking/retired/dual/
ONE - Promise Fasttrak 100 (modded Ultra 100) PCI, RAID (0,1,0+1), Two PATA ports. Used this for a while to mirror my OS drive in the server, works great.
TWO - Alteon ACEnic Adapter 710025, (Similar to 3COM 710024) Gigabit, RJ45 copper, Jumbo frames up to 9k, 512k cache, 32/64-bit, 33/66 MHz PCI bus master, looks like this:
http://www.3com.com/other/downloads/infra/corpinfo/en_US/710024_ang_lo.jpg
General warning about these, those heatsinks are there for a reason and it throws some heat.
ONE - Matrox Millenium II PCI 4MB - Great add on for a second monitor, sharp picture.
ONE - ASUS P4C800-E Deluxe v2.0a. Intel 875P chipset, Intel CSA-based Gigabit LAN, Promise SATA RAID, 800 MHz FSB, Dual-Channel DDR400 Memory, Intel PAT, supports Prescot. MFG link:
http://www.asus.com/products4.aspx?modelmenu=2&model=175&l1=3&l2=12&l3=30
One warning about this board: I had problems with games locking up with it. Pretty sure it wasn't the video card or memory. You may have issues with it, I don't know. It never locked up in windows, passed memtest and I also looped 3dmark for hours without problems.
**********End of Bundle**********
Individual Items:
Processor $80: Pentium 4 2.8ghz 800FSB, SL6WT, Northwood 0.13 micron, Hyperthread - There are some bent pins on this CPU, nothing bad but it just won't fall perfectly into the socket, I bought it off ebay like that. Just took it out of my server yesterday, ran fine 24/7 for about a year.
Heatsink $15: Alpha PAL8942, for Pentium 4 Socket 478. Copper and aluminum construction, uses 80mm fan. All the little screws springs and plastic washers required for mounting are included. Heatsink has a couple bent fins and you can tell the hardware has been used a couple times, nothing to bad and will work fine. If you ask I will throw in a couple case fans, nothing special. http://www.alphanovatech.com/c_pal8942e.html