mikerault
What is this storage?
I have a 2-node setup using 32 bit servers running Redhat Linux 2.6.9-67.0.15 connected through a brocade switch to twho disk arrays, a NStor 18f and an NStor 8f. Node 1 sees all 26 drives, node 2 sees all but the last disk on the 18f.
During the POST the fibre card shows that it sees all 26 drives but dmesg output shows that the last drive is never mapped to /dev/sdz as it should be.
Any ideas out there?
Mike
During the POST the fibre card shows that it sees all 26 drives but dmesg output shows that the last drive is never mapped to /dev/sdz as it should be.
Any ideas out there?
Mike