Telephone Recording Device - Easy To Build?

Piyono

0
Joined
Jan 25, 2002
Messages
599
Location
Toronto
Hey, guys,

I'm looking for a device to record telephone calls. I've gone through three modems and countless pieces of software and can't find anything that sounds halfway decent so I decided to try something like this:
http://www.telecomaudio.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=ta&Product_Code=VoiceTap

Of course, whenever I'm faced with the prospect of spending money, I always try to see if I can get away with spending *less* and still acheive the desired results.

Does anyone know what goes into these handset recorders? I have a basic understanding of electronics and good command of the soldering iron. If this is just a very simple device then I'd like to try my hand at building one.

Insights?


Piyono
 
I found this.

Here is the schematic:

phonrec.gif


A Google search turns up plenty of these things. The circuits look relatively simple to build. Just get a breadboard from Radio Shack and solder away. If you don't have an assortment of parts you may need to buy those, as well as a nice case. I doubt everything will set you back more than $10. I could make most of the circuits out of spare parts I have lying around.
 
You might also want to check to make sure that such recordings are legal within your county/state/province/whatever.

In Indiana, recording phone conversations without consent is legal. In nearby Illinois, it's not.
 
Mercutio said:
You might also want to check to make sure that such recordings are legal within your county/state/province/whatever.

In Indiana, recording phone conversations without consent is legal. In nearby Illinois, it's not.

You'll likely find the information you need here. (That's a useful site to bookmark, by the way.) Note that the issue can become very messy if you are on a call to a state that has different laws regarding phone call privacy.
 
Back
Top