PoE Cabling

sechs

Storage? I am Storage!
Joined
Feb 1, 2003
Messages
4,709
Location
Left Coast
How much does the cabling matter with power over ethernet?

My story: I've ordered and LTE modem that needs to be stuck in a window for reception purposes. It would be much easier to use PoE than running an extension cord back to the UPS. I estimate the maximum wire distance from the injector to the modem to be three meters -- it'll probably be closer to two.

All of the stuff that I'm reading online says that you gotta use cat 6a cables. But they all seem to be referencing long-run, infrastructure wiring.

Can I use one of my existing cat 5e cables for this short run or am I really better off picking up cat 6/6a?
 

Stereodude

Not really a
Joined
Jan 22, 2002
Messages
10,865
Location
Michigan
I don't see why it wouldn't work with your existing CAT5e cables given how short the run is.

I've seen lots of VOIP setups using CAT5e and PoE.
 

sechs

Storage? I am Storage!
Joined
Feb 1, 2003
Messages
4,709
Location
Left Coast
VOIP handsets are generally low voltage/low power.

I'm not exactly sure how much this modem will be using, but it's 802.3at, up to 30W.
 

sechs

Storage? I am Storage!
Joined
Feb 1, 2003
Messages
4,709
Location
Left Coast
Found this calculator, and it looks like, as long as it doesn't catch on fire, any Cat5e or higher cable will do.

It also turns out that I only have one cable of appropriate length that's not in use, so I have to order one anyway. :rolleyes:
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,511
Location
Horsens, Denmark
You'll be fine. I've run 35W+ wireless links on the end of 150' Cat5e STP cables without issue. I've never even had a cable get warm (could be because the STP I use has braided steel around it?
 

sechs

Storage? I am Storage!
Joined
Feb 1, 2003
Messages
4,709
Location
Left Coast
This would have been a UTP cable, but I doubt it would have been a big difference.

Went ahead and picked-up a five-pack of Cat 6 STP cables.
 
Top