4-Port Internal Controller

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
I need a simple, cheap ($100) internal 4-port SATA card for PCIe (1x, 4x, 8x OK). It will be used with 3 independent drives, i.e., no RAID, ever. Thanks.
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,275
Location
I am omnipresent
Having had a couple Syba cards fail in obnoxious ways, that's not a direction I'd be willing to contemplate.
 

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
How long does the Adaptec take to read its BIOS? The reviews mention an annoying delay.
 

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
I use this Adaptec controller. The $75 Promise card is flakey under Windows.

Thanks. I received the card today and got it working in both XP32 and XP64. The burst rates are a little slower than normal (225MB/sec) though that may be due to the slot. It supports the hot swapping just fine, but the external BlackX drives only run at SATA 150. It's not critical since I will reorganize the ports anyway. The primary goal was to achieve 17+ ports without using 4 add-in cards.

The BIOS delay is not an issue.
 

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
This card appears to be the root of the hard drive problems I have been having lately. I thought there were some bad drives, but not when moved around between controllers. I'm not sure if it is one port in particular or a general problem between the controller and certain drive brands. :crap:
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,729
Location
Horsens, Denmark
I was informed by Areca support that they don't like Samsung drives. You'd think that that kind of crap would have been sorted in the decades of standards and testing.
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,729
Location
Horsens, Denmark
You trust Areca's comments about Adaptec?

No, my comment was more about the general state of controller/drive compatibility. The fact that 7 years (and countless generations of products) after SATA was created, the spec still has enough vagueness to cause basic incompatibility is ridiculous.
 

Bozo

Storage? I am Storage!
Joined
Feb 12, 2002
Messages
4,396
Location
Twilight Zone
No, my comment was more about the general state of controller/drive compatibility. The fact that 7 years (and countless generations of products) after SATA was created, the spec still has enough vagueness to cause basic incompatibility is ridiculous.

Adaptec is not much better. After fooling around with one of their SATA card for days, I finally found out the model of the hard drives wouldn't work. Other models of the same make were fine.
I found the answer buried deep in a help section on their website. :frusty:

Nothing was mentioned in the tech pages for the SATA card.
 

Santilli

Hairy Aussie
Joined
Jan 27, 2002
Messages
5,278
HI
I've been using the Silcon Image SiL 3112 Sata Link Controller with excellent results.
It's an old two port, but, I'd have a look at them for such stuff.

I've found Granite Digital generally has had stuff that works, pretty much always. The problem is, they are some times too expensive.

http://www.granitedigital.com/satapciandcardbushostadapters.aspx

I'd give them a ring, see what they have for internal cards from S.I.
 

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
Whoa. The SIL3112 is the dinosaur of SATA. I think that was what Maxtor shipped with the old SATA 150 drives 7 or so years ago. :pirate:
 

Chewy509

Wotty wot wot.
Joined
Nov 8, 2006
Messages
3,357
Location
Gold Coast Hinterland, Australia
Whoa. The SIL3112 is the dinosaur of SATA. I think that was what Maxtor shipped with the old SATA 150 drives 7 or so years ago. :pirate:

It is a dinosaur, considering my Tyan K8W motherboard (which is 5.5yrs old) has the Sil3114 controller on board for SATA connectivity. (The 3114 is the 4port version of the 3112).
 

Santilli

Hairy Aussie
Joined
Jan 27, 2002
Messages
5,278
Whoa. The SIL3112 is the dinosaur of SATA. I think that was what Maxtor shipped with the old SATA 150 drives 7 or so years ago. :pirate:

Dinosaurs worked for a LONG TIME.;-)

Since Granite Digital specializes in removeable drive setups, and this seemed to be part of the issue, I would certainly check with them on their card experience.

SI may have made a new generation card that is worth it, or may not have.
 

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
The SIL3132 is the most popular of the line. There are dozens of brands of inexpensive little 2-port SATA 3Gbps PCIe cards based on that chip. For some reason they never made a native 4-port version. There are some 4-port PCI SATA cards today that are still based on the 3114. I use an old one for a 4-bay external case and do not care about the SATA 150 speeds. It supports hot swap, so the drives can be powered on or off without rebooting.
 
Top