Bowled Over By Cereal Attached SCSI

[iGary]

SAS is getting closer!

So, sometime this year you will be able to plug yer SAS and SATA hard drives (along with SATA opticals and whatnot) into a high performance SAS controller.

http://www.hgst.com/portal/site/hgs...20040128.html&beanID=736703123&viewID=content

 

[sechs]

I was thinking about something along the lines of Rice Krispies boxes with 50-pin connectors....

 

[zx]

I was thinking about something along the lines of Rice Krispies boxes with 50-pin connectors....

Free SAS host adapter inside the box!

 

[Santilli]

3 GB/sec drives? Any idea about what kind cost for such a setup?

At what point is there a bottleneck on the current server/workstation Supermicro motherboards? In other words, what can the motherboard chipsets and data paths handle, using the current Xeons etc.?

Thanks

gs

 

[Santilli]

Are there any really big processor jumps coming soon? Are the Opeterons close to max design speed?

s

 

[blakerwry]

3 GB/sec drives? Any idea about what kind cost for such a setup?

At what point is there a bottleneck on the current server/workstation Supermicro motherboards? In other words, what can the motherboard chipsets and data paths handle, using the current Xeons etc.?

Thanks

gs

That's 3 Gb/sec, versus S-ATA's current 1.5Gb/sec. In a year or so that'll probably become standard.

 

[Pradeep]

3 GB/sec drives? Any idea about what kind cost for such a setup?

At what point is there a bottleneck on the current server/workstation Supermicro motherboards? In other words, what can the motherboard chipsets and data paths handle, using the current Xeons etc.?

Thanks

gs

PCI-X 133MHz slots (not to be confused with forthcoming PCI-Express) are good for a theoretical 1GB/sec.

Opterons have plenty of headroom yet, I would anticipate them moving up to 3GHz at least.

 

[Santilli]

PCI-X 133MHz slots (not to be confused with forthcoming PCI-Express) are good for a theoretical 1GB/sec.

Cool :excl: :excl:

I/O Expansion 1 8x/4x AGP Pro
1 64-bit 133MHz PCI-X
2 64-bit 100MHz PCI-X
2 32-bit 33MHz PCI

I've got one of those, :wink: and I suspect the 100 mhz PCI-X aren't too bad, either.

:mrgrn:

s

 

[iGary]

* A PCI Express device will not have to share *any* PCI bandwidth with another PCI device, however, PCI-X will have to share bandwidth if there's another PCI device plugged into that PCI bus segment.

* PCI Express is a full-duplex bus, PCI-X is half-duplex.

* PCI Express will cost less overall.