Chewy509
Wotty wot wot.
They did it a few years ago the introduction of the Core i-Series (i3, i5 and i7).
Dead AMD 3200+, Dead ram, and possibly Power supply
- Thread starter Santilli
- Start date
Sol
Storage is cool
I'm pretty sure every mainstream and server CPU AMD produced in the last 7 years or so has an on-die memory controller . I've never heard of one failing though...
Santilli
Hairy Aussie
- Joined
- Jan 27, 2002
- Messages
- 5,286
REALLY strange that the two other cpu's I have, the 3200 and the 3800, both won't see the memory, dual sticks, as well. I had both of them in the Asus board, for the time it was working, and neither saw all the memory. Likewise in the Gigabyte board.
So, I have two other chips that won't see the memory that is working fine now, with the X2 64 3800+.
We'll see how long this setup lasts.
So, I have two other chips that won't see the memory that is working fine now, with the X2 64 3800+.
We'll see how long this setup lasts.
BingBangBop
Storage is cool
- Joined
- Nov 15, 2009
- Messages
- 667
Rather than saying that you have been incredibly unlucky, compared to others, with the CPU memory controller, I would contend as the more likely scenario that the different CPU's are configuring the BIOS with slightly different RAM settings and your old motherboard has developed issues with the RAM bus timings that makes it very picky. User error, flaky MB's, power supply issues, and/or flaky RAM are incredibly far more likely than CPU's with failed memory controllers where the CPU works otherwise.
But then what do I or others know -- You're the computer god that knows it all.
But then what do I or others know -- You're the computer god that knows it all.
Chewy509
Wotty wot wot.
You're correct, AMD introduced the IMC with the original Athlon64 and Opteron (Clawhammer and Sledgehammer CPUs) back in 2003.
I've never seen just the IMC fail, it's always been the entire CPU fail. Mind you, if the IMC is flakey, the internal POST (within the CPU) should have picked that one up.
Chewy509
Wotty wot wot.
Not intentionally. However, since WinXP is nearing EOL, I wouldn't be surprised if the amount of testing and quality control would start to lapse slightly...
Mercutio
Fatwah on Western Digital
There are too many enormous Microsoft customers still using XP for them to slip up on that.
But for cases where the same Windows installation has existed in-place for six or seven years, no it wouldn't shock me if there were issues even on a pretty vanilla setup.
Santilli
Hairy Aussie
- Joined
- Jan 27, 2002
- Messages
- 5,286
Seems either the Xerox Xd130 drivers, or the picturemate drivers work fine, until SP3 is installed, then it starts blue screening. Remove them, and it works fine.
After going through all this, it took lots of time, invested lots of money, most of which I did get back.
That said, it could fail tomorrow. I can see where as IT guys, unless you have a huge box of parts from that time, it is MUCH wiser to get rid of the entire setup, and move to a new platform, even if it is much more expensive.
In particular when you use consumer grade parts you are more likely to really be better off
dumping the entire setup, and moving to another, more modern platform.
Watched movies for a couple hours on it, no problems.
After going through all this, it took lots of time, invested lots of money, most of which I did get back.
That said, it could fail tomorrow. I can see where as IT guys, unless you have a huge box of parts from that time, it is MUCH wiser to get rid of the entire setup, and move to a new platform, even if it is much more expensive.
In particular when you use consumer grade parts you are more likely to really be better off
dumping the entire setup, and moving to another, more modern platform.
Watched movies for a couple hours on it, no problems.
CougTek
Hairy Aussie
I have an old Pentium 4 2.8GHz on a cheapo s478 µATX motherboard with a VIA cheapset. I would put it in a standard mid tower (I have a few used ones here), but the only good AGP video card I have is a GeFarce 6200 128MB low profile, and, with a DVI output. I can't waste all that good vintage stuff. I have a few 40GB hard drives (IBM's, noisy as Hell) and even a spacious IDE 80GB drive. Should I get a 100$ Antec NSK1480 or limit myself to a 63$ In Win BL631? Of course, I can get business-class used P4 3GHz for 60$, but I just can't convinced myself to dump worthless (but still working) hardware just to save a few bucks.
Mercutio
Fatwah on Western Digital
That would be a damned nice machine for retro-gaming, if you were the sort of person to do that.
Santilli
Hairy Aussie
- Joined
- Jan 27, 2002
- Messages
- 5,286
Update:
The X2 3800 plus memory controller allows the 2 gigs to be recognized.
All is up and running, except, it's currently headless. Thinking cheap craigslist monitor, rather then Costco...
Either that, or a 50" Panasonic 1080P Plasma...
The X2 3800 plus memory controller allows the 2 gigs to be recognized.
All is up and running, except, it's currently headless. Thinking cheap craigslist monitor, rather then Costco...
Either that, or a 50" Panasonic 1080P Plasma...
Howell
Storage? I am Storage!
I have a retro 8G seagate x10 if somebody wants to pay shipping. I may even have an adaptec to go with it.
Santilli
Hairy Aussie
- Joined
- Jan 27, 2002
- Messages
- 5,286
I'm waiting for a 50" 1080p to come around, at a price I'm willing to pay.
So far, only Panasonic 50" 780's are in the price range I'm after.
I'm too close to the 37" Vizio, so right now, the HTPC is headless, and, my gf is jumping out of airplanes...
So far, only Panasonic 50" 780's are in the price range I'm after.
I'm too close to the 37" Vizio, so right now, the HTPC is headless, and, my gf is jumping out of airplanes...
Santilli
Hairy Aussie
- Joined
- Jan 27, 2002
- Messages
- 5,286
The 37" is in my bedroom, along with a 27" Samsung dual setup.
I moved the chair and some surfboards out, so I can back up.
Not much point in a HTPC running, when I use mine in my room. If I need to, I'll move the Vizio to the living room. 50" would be better, but, I can move it closer to the couch, since the monoprice cable is pretty long, and we have a coffee table I can put it on.
Longer I wait, the more the prices drop. Don't see much reason to tie up 500-1000 dollars for something I never use.
My girlfriend is hardly ever here. Between her friend's dieing medical needs, and constant trips to the hospital, and jumping out of airplanes, it's going to be awhile before we spend much time here.
I'm also working 6 to 7 days a week, so I'm not easy to catch up with.
I moved the chair and some surfboards out, so I can back up.
Not much point in a HTPC running, when I use mine in my room. If I need to, I'll move the Vizio to the living room. 50" would be better, but, I can move it closer to the couch, since the monoprice cable is pretty long, and we have a coffee table I can put it on.
Longer I wait, the more the prices drop. Don't see much reason to tie up 500-1000 dollars for something I never use.
My girlfriend is hardly ever here. Between her friend's dieing medical needs, and constant trips to the hospital, and jumping out of airplanes, it's going to be awhile before we spend much time here.
I'm also working 6 to 7 days a week, so I'm not easy to catch up with.