question Good SATA card?
- Thread starter Adcadet
- Start date
Not so fast...Can anyone recommend a 4 or 8 port (it seems there is not much difference in price) SATA or SAS card that can do hardware RAID 10 (not soft RAID or Hardware assisted)? PCI-e x1 or x4 preferred, but will settle for x8. Compatible with ESXi 5/5.1 as well.
How about the LSI 9260-8i or Dell Perc H700?
They'd be nice, but new, they are $450 ~ $500 in Aus.
CougTek
Hairy Aussie
I don't know how much you expected to pay for such a controller, but I've found an IBM ServerRAID M5014 at 300AU$ and another ServerRAID 5110 (based on the LSI 2208 - successor of the 2108 ) for ~220$ (plus ~45AU$ for shipping). Unless you are lucky at a local shop, I don't think you'll find much better than those.
The Dell and LSI variants are much more expensive. I've not been able to find one from Fujitsu. There's also one from HP : the H220 (LSI 2208 clone) at 290AU$ plus 48AU$ for the shipping.
Last edited:
I didn't know your budget. I know those are great cards that work reliably with ESXi 5 from first hand experience and met your criteria.
They're similarly priced in the US as you're seeing. I didn't check eBay etc.Thanks Coug.
Handy, I didn't mean to disparage your post. The fault would be mine for not making myself clear.
And just a thought, would zfs be an alternative to RAID? Especially if I'm only going to create some pools on a FreeNAS box and serve them up to a couple of VM's?
Handy, I didn't mean to disparage your post. The fault would be mine for not making myself clear.
And just a thought, would zfs be an alternative to RAID? Especially if I'm only going to create some pools on a FreeNAS box and serve them up to a couple of VM's?
Chewy509
Wotty wot wot.
Absolutely, on provision you have enough RAM on the host. I can't remember what the FreeNAS recommendation, but IIRC it's in the order of 8GB+ of RAM.
My reading says that the RoT is 1GB RAM per 1TB of storage for a moderately used pool. If there are few users, then you can get by with half the RoT RAM. If it's a write heavy environment with lots of users, you will need more RAM per TB of storage.