Low power box for running VM? Oxymoron?

Santilli

Hairy Aussie
Joined
Jan 27, 2002
Messages
5,278
Hi
If you wanted a server box to run VM, using 64 bit, 7 Ultimate, and probably
VMware, yet didn't want to add the straw to the camel's back on your PG&E bill, how would you configure the machine to be both fast, yet have limited electricity usage?
Inexpensive would be good, as well, but I think I'll be settling for value...

GS
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,728
Location
Horsens, Denmark
Considering most of your VMs won't be stressed hard (at least not all at once), CPU power is mostly irrelevant. If you plan on running many machines at once, memory is important. If these machines will be simply sitting there most of the time, storage is mostly a non-issue.

So a low-powered CPU with some drive of some kind and lots of RAM would be my default answer.

What/how many VMs are you looking to play with?
 

Santilli

Hairy Aussie
Joined
Jan 27, 2002
Messages
5,278
Running a mail server,demo server, development server,

3 VMS, and exchange server.
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,275
Location
I am omnipresent
An i3-2100 was suggested as a possible basis for my low-power file server. I suspect they would work for your needs as well. Or you could let your roommate to find his own damned hardware.
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,728
Location
Horsens, Denmark
Yeah, i3-2100 sounds about right. And depending on the load (this is a test enviroment, yeah?), 8-24GB of RAM. 12-16 would be a good start. Considering that most of the i3 boards only have 4 DIMM slots, you are looking at 4x4GB DIMMs for 16GB total. Those are DB intensive tasks, so an SSD would be in heaven if your budget supports one large enough. And because it is a test environment, and because it is so easy to back up and restore VMs, no redundancy is needed beyond a backup to a cheap disk somewhere.
 
Top