Search results

Tape drives have pretty much always and forever been for the cost-no-object segment of the population, usually businesses who can use it for a tax write-off. That said, LTO5 is quite affordable as far as that technology goes. If you're serious about maintaining your backups, if your data is...

Another potential problem waiting for me if I go to the new platform -- E-cores. Apparently they kind of just screw everything up, scheduling-wise. I'm hoping there's a way I can tune the scheduler such that the hypervisor uses the E-cores to remain responsive while the P-cores are getting...

The SATA controller on the X470 board I had in my server has decided to bite it. I thought one of my drives was failing, but no -- the entire controller just disappears to the host, silently, after about 20 minutes. I have a four-port SATA card on the way so I can limp along until I can afford...

The man has flat out admitted he's planning to become a dictator. I don't care if you think he was joking or he misunderstood the question. He seems to think it's cute to say he'd be a dictator for day one, but there's no telling where it'd actually end. With Manchin bowing out of the Senate...

Wishing you luck as well David, six months sounds like a lot of time but I know full well given the constraints on exactly what you can take to satisfy the requirements makes it much more stressful. Happy new year everyone!

Lunar, most people don't edit content like that at all. That's how they watch these displays and think they're perfectly acceptable -- they don't need accuracy and frankly some don't want it either.

Welp, that was a harrowing procedure. I: - swapped drives/RAM/cards between the case/PSU/board/CPU of the main and server, giving the server much more workability, thermal headroom, and extra card space - tried to swap CPUs to give the server moar coars but for some reason, Proxmox throws a...

Most people don't even notice color problems. I'm actually one of them -- "good enough" is good enough. As long as it's running in full RGB mode instead of limited, it's fine for me -- heck, I can still get along mostly fine in 16-bit color mode, it's just that banding and dithering is very...

Yeah, I personally don't expect to hit much more than 300-400MB/s to my array even over 10GbE, but it seemed better to leapfrog 2.5 and 5GbE interfaces and just go directly to 10Gb so I have some room to grow.

Oh, I'm sure I could get it to work, but I have literally never had an Intel NIC let me down, and I haven't even heard of Mellanox before you mentioned them. I'm sure it's perfectly fine, but I'm nothing if not a critter of habit. That said, were I to do this over again, I would likely give them...

It's my understanding that -- and correct me if I'm wrong guys, I'm not terribly familiar with hardware RAID implementations -- one typically cannot bring a RAID up on a different kind of controller than what was used to create it. Unless you get lucky with trying to bring it up with, for...

I need at least 5m, probably closer to 6 for one of my runs, and I'd like an Intel chipset if I can get that at all as I've had much better luck with them and drivers for them exist for everything under the sun. The cards I bought are Intel X540-based. As I said, though, I've got what I got...

I frankly would not buy anything on the promise of future proofing or an upgrade path, because as Intel has proven several times, upgrade paths are a lie. Buy what you want now for the performance you can buy today, and treat anything else like a bonus. AM4 is an aberration, I believe, not where...

See, I would have just done fiber (as much as I hate terminating it) or copper direct attach like Lunar, but the cards at the other end are RJ45 and for some ungodly reason SFP seems to ratchet the price up on the cards by about 2-3x. I don't think it's necessarily a huge issue the way I have...

Hmm. 10Gb copper transceivers definitely don't run cool. Even linked at only 1Gbps (I don't have the 10Gb cards in yet) they're producing enough heat to burn me when I pull them from the switch. They do work fairly well though, even if the switch is a bit more finicky than I'd like -- usually...

Doing some upgrades to my network again. I bought a cheap 4-port 2.5GbE switch with dual 10Gb SFP ports and a couple of copper transceivers that should be able to do 10Gb over CAT5e under very short runs (the longest I'll be doing is around the room to my main desktop, which will be ~15ft or...

The problem with eliminating on-prem FS stuff is that a lot of the businesses I run into simply don't have the bandwidth to make using a cloud service across however many computers feasible. Whether that's because of their positioning and the lack of options from the area ISPs, or they just...

Oh, and regarding DDNS, I eventually just decided to abandon my old DDNS provider and go with one that was supported natively. I was using Dynu because I'd been using NoIP before this and got annoyed with needing to "confirm" my hostname every thirty days, and Dynu didn't need that. I was...

OpenVPN is just what I used first, know how to get running, and have clients configured for everywhere. I don't have the bandwidth at home for it to really matter either way, I'm working with 10mbps up and everything I have can saturate that easily. That and it looks like Wireguard would require...

Well. I just learned I don't qualify for the federal connectivity program that was partially subsidizing my cable bill anymore, so to lower it, I took my service down from 500/10 to 250/10. Which was plenty when I first moved in. I'm not sure precisely why or even when I upgraded. The main...

Well, I got pfSense going and it was only very annoying. The ISO won't boot from a Ventoy USB and I had to make a special USB just for it with a special USB-specific image, even. After some hiccups with the routing or something being dropped every couple minutes -- fixed with a reboot -- it...

Good to see you again Coug!

I do actually use the drill method to destroy data on drives from machines we take from customers for disposal. Drives are cheap and plentiful, no sense risking a lawsuit for saving them.

The Pismo and Wallstreet G3s were black. Apple had a black polycarbonate Macbook in 2006-7 I believe, though that may have just been a black display and white under-case.

Both of my B450 boards are ASRock. My X470 in my main now is a Gigabyte. My friends report issues on everything from ASUS to Gigabyte to Biostar/MSI to even some OEM machines, all the way from the B350 chipsets on up to X570. None of us own Zen4 yet -- those of us inclined to upgrade bought...

Ryzen was more the start of AMD and Intel actually trading blows vs AMD having total dominion over the market. Intel was caught with their pants down at first, sure, but Coffee Lake and especially Alder are actually quite good performers. Intel just took way too long to bring pricing back to...

Black Friday was always a prime time to jack everything up 50% prior to it so people felt like they were getting deals. Better to just buy something when you need it vs. buying at a particular time of year.

Right? This isn't even the first time Apple's made a black computer. The coverage is ridiculous.

Bear in mind with that figure that Ryzen laptops are quite uncommon and a lot of folks have gaming laptops. You're not likely to get any of those without an Intel CPU and nVidia GPU. The Steam Deck has gone a long way to remedying that, though. Xbox/PS/Switch are the lion's share of gaming...

Are you sure you're not confusing Coug for P5-133XL?

Got it in and after a bizarre moment where I figured out only the armeabi v7 build would work -- side note, does this mean this device is only ARM32? -- I have it going. Very nice... I canceled my Nebula/CuriosityStream sub because I didn't watch it enough, I cancelled YT Premium, now it just...

I'd say a decently powerful drill with a hard enough bit could easily poke holes through the drive with enough care and patience. Alternatively, disassemble the drive (most use T8 screws IIRC) and pull the platters -- if they're glass cores, you can shatter them, if not, I imagine bolt cutters...

I was borrowing an Omada router from work to test-drive and see if I wanted to buy one for myself, since we had spares (not in box, don't have a cow) and it was almost perfect... unfortunately, there's a longstanding bug/feature request related to DHCP options. I run a PXE boot server, I've got...

It's Qualcomm, so I have about a mountain of salt to take their claims with. They've had their chance to be the market leader in performance and they blew it. Windows on ARM won't take off until the Qualcomm exclusivity contract finally ends because their desktop/laptop offerings don't perform...

The new ONN one is actually what I was recommended by a friend of mine, that's likely what I'm going for.

Considering grabbing a cheap Android TV box to check out SmartTubeNext, thanks for the idea Merc. If it works out I'll ditch YT Premium.

I traded the Parhelia off to a friend of mine who can appreciate it better -- I got frustrated with the drivers and being unable to disable vsync for love nor money. It also benchmarked worse than a GeForce3 Ti500, absolutely pathetic for something that was coming out before the Radeon 9700 Pro...

They do nothing. I think you can sideload applications through iTunes if you turn on some obscure developer mode, but it's a moot point since, you know, nothing open really gets made for iOS.

Works for me. I almost thought it was some new "this site works best in internet explorer" bullshit targetting chrome instead until I realized I'm using Firefox and it would have prevented me from using it were that the case.

Since when does Microsoft care about negative press that doesn't come in the form of a lawyer serving them court documents? They've been a technological punching bag for over thirty years now. They don't care as long as people keep buying the product, which, they will, because of inertia and...

I feel a little pedestrian with my 3xWD Blue setup but it's been reliable and it's more space than I really plan to use for a very long time. I think I'm sitting at ~5TB used on the array, total? And thats with a backup of my steam games thrown on there so I don't have to waste my data cap...

Yep, everytime I try to do right, I'm wrong. Everyone's current and they got their latest ones a couple weeks before I showed up in preparation for the worst. Just sucks that the worst did in fact come to pass.

Well it's probably for the best that I'm so far away Merc, apparently the allergies I was fighting with a day or so after landing was COVID. I must have picked it up at the airport, or so my Mom says. I feel like an idiot and a horse's ass. I got over it fine by Tuesday, but my Grandma is...

My mom did a fair bit of her growing up in Crystal Lake. I was born in Elk Grove myself, we lived in Itasca for a while, then Romeoville, then my dad and I moved down to Kentucky.

I still support several businesses with fax lines and machines. Fun fact, PCs were able to fax directly back in the day, that was half the point of most modems, but I don't recall seeing anyone ever use it. Such a shame, really. Speaking of landlines, I've been thinking about getting with our...

As proof that my life is a comedy, I've used up this year's allotment of good luck and found a Antec Plus 1080 case at a thrift shop. And it has a build in it! A funky dual-Athlon MP build using an MSI K7D Master-L. It has dual 2000+s and a gig of DDR RAM, and, get this, a Matrox Parhelia. For...

It was a heroic battle, but I got my oil changed, tires rotated, and rotors/pads replaced without major incident on Friday afternoon. I borrowed a floor jack from a coworker since my trolley jack apparently has erectile dysfunction (the hydraulic doesn't seal anymore), and even that couldn't...

Well, the Athlon XP build has kind of evolved into its final form: I found a reasonably-priced example of the Geode NX 1750, or in other words, a heavily, heavily binned Thoroughbred AXP nominally clocked at 1400MHz at 1.25v for a TDP of 14W. It came from Germany and arrived quite a bit before...

Just trying to get it high enough to put a stand under it, yeah, but something's wrong with my jack. I'm going to borrow one from a coworker over this weekend so I can get the work done. It's past time.

Nice! I meant to change out my rotors, brake pads and oil today, but either there's something wrong with my jack or it just can't lift high enough to move my car. I'm going to need to get another one before I can do the work.