Search results

Couple weeks maybe? Depends on use.

I got one, and time was absolutely right. This will be awesome as a bike monitor. The question now is whether I want to put some kind of plan on it or keep it WiFi only. Being able to use it for "my bike is broke" calls to friends, or so wifey can reach me while riding would make sense. And...

The complyfoam tips actually shipped with my triplefis (6 pairs in the box). They are apparently the new standard. I love them.

JTR, How difficult would it be to incorporate a basic taillight into that battery pack? 5-10 surface mount red LEDs oriented in a 3" line on the narrowest board possible, with the smallest wire possible back to the battery pack? I'll just packing-tape/zip-tie it to my seatpost. No optics necessary.

250GB of RAM and a few TB of disk? Nice.

Got the new bike. It is an utter revelation. 3mph faster, heart rate 10bpm lower, 20% further, and less sore in the end. I'll need to set aside more time for my rides in the future if I'm going to keep pushing. Of course, these new speeds are even more dangerous without a headlight...

1. Put noisy 1U server on your desk 2. Use that as an excuse to put on your noise cancelling headphones and close your door 3. Use that as an excuse to ignore everyone and all phone calls all day Awesome.

;)

It should, the semi-pro I work with is exactly my size/proportions (minus the gut) and has the same bike. The shop is an authorized Specialized Fitting Center, so that shouldn't be a problem.

Sandforce were the guys to figure out how to get the write amplification under control so MLC could have decent write cycles. IIRC, their stuff is also used in the Z-Drive and their top-end VeloDrive.

Just bought a new '11 Roubaix Apex Compact (size 58) on clearance for $1k. Sight unseen. While massively sleep deprived. It seemed like a good idea at the time. Hopefully I can stay awake on the drive out to Carmel to pick it up.

Yeah, I don't think I need that level of complexity. At the moment I have the VMs on one ESX server backing up to the other ESX servers, so a once-every-three-years hardware failure simply means firing up the backup that already exists on the other server. It isn't automated, and there is...

3Ware was a competitor, you buy competitors to strip their tech and their customers before burying them. Sandforce is a complimentary tech with a good name. It will give them leverage with the other users of that chipset as well.

I don't bother with the iSCSI backend, all the disks are local. The simple description of the current problem is just flaky hardware with the simple solution being better and more hardware. Of course, if I wanted to implement systems and management capabilities that would prevent a flaky...

I thought I was getting good at my job. No significant loss of productivity company wide in the 3 years I've been in charge. No loss of data. No virus infections. And for the last 2+ years since I got most of it set up, no all-nighters. I have 3 VMWare servers, any 2 of which have the...

Supertoaster!

Indeed. I'm swapping out all our serial/parallel POS crap to at least USB, network if I can manage it. That is an interesting thing. My only use for serial would be to remotely control my 4x4 HDMI matrix switch (IR and serial, gotta love the monoprice folks).

The REVO drives I've been buying are LSI RAID cards tied to Sandforce controllers tied to memory. The pending Intel PCIe drives are Intel all the way. If LSI/Sandforce wants to compete in a growing field with shrinking margins, consolidation might be their only play.

My congratulations to Lenovo, for building a desktop that is simultaneously: 1. High-tech (No PS/2 ports) 2. Low-tech (VGA only) 3. High-tech (No Parallel) 4. Low-tech (Serial)

Google reads everything.

Some of my lower volume clients just give me some Benjamins on my way out the door. Of course I declare it as income later on, but it does make the billing process easier.

I like this stuff for making occasional use items more accessible, but I can't imagine using it full-time. Tactile feedback is simply too valuable.

My i1 (1.5) doesn't have an issue, but it is a piece of crap anyway.

I withdraw money at the teller only because the ATM won't give $100 bills (only in Vegas) and has a cap of $500. I use plastic for stuff I want to keep track of (food/gas/home improvements) and cash for stuff I don't want to keep track of (toys).

I forget who it was who earlier was comparing Ferraris to Civics?

Not the one I care about.

HDMI over optical is what we are looking at, not nearly as expensive as I would have anticipated (~$350 for this length).

Sounds good. Best to do it right than quickly I suppose, but this world of same-day shipping and overnight delivery has skewed the senses a bit.

RAM still isn't so bad, it's the hard drives that are going crazy.

Got to drive a 959 at laguna seca once...in the parking lot...but it was still fun.

About 40 feet direct, the cable run will end up being closer to 75 feet. Thinking wireless? There are two very sturdy walls in between.

Yeah, I can propose whatever I want, but it has to be defensible. In my interest I'll be looking for as fool-proof a system as possible that offers quantifiably better performance than what he had for the lowest price. That price (of course) needs to be reasonably near the projected repair...

How Canada's TD Bank Is Invading U.S. Market

Just sent the SIM2 back to Florida for repairs, when the bulb blew it sprayed molten glass all over the internals and caused the fan controller to fail. Now I get to decide what the "tipping point" repair cost is that causes us to evaluate new units. Also needing consideration is that most of...

I wonder what the knock-on effect will be to SSDs? If this will push OEMs to offer SSDs in lower-end machines?

I haven't cut a manual check in years, but the system is behind the times. I go online, and say who, how much, and when, and then the bank physically cuts a check and puts it in the mail. WTF?

Got plans for the 4GB DIMMs?

Sounds good. Honestly I could wait if Cutter will provide a higher-performing unit. Just upgrade any shipping options and I'll cover it.

Rotary would be fine. How big a deal is not being able to choose the bins? Will this be "water resistant"? I don't plan on riding in the rain, but it happens.

That does look good, thanks Stereodude.

Sounds good. What would the charger look like, just a wall-wart? I already have an outlet in my bike storage. Of course, with the optics now missing on my 150+cd HL-EL135, I am in a bit of a hurry before I crash into something. What sort of timeframe can you manage?

Yeah, a female friend here showed me some of her data. 18mph average for 80 miles and her heart rate never exceeded 130bpm. I was interested in riding in their group, but it will take me a few years to get to that level.

She doesn't plan on riding the same way we do...this will very much be riding the bike trail along the beach from Sand City perhaps to Carmel. If I really push, I can imagine getting her up to 8mph. She hasn't ridden a bike in 25+ years, and she considers the step-through frame a safety...

Looks like I'll be getting a cruiser for my wife. I'd love to get her something with a touch more performance, if anyone has any recommendations.

I would love one with a TosLink or SPDIF input.

I'm a current BofA customer. Thanks to having a mortgage with them I have an upgraded account without charge. This also allows me to avoid the debit card fee. That doesn't change the fact that I'll be moving to the local credit union as soon as I can refinance.

Yeah, if SP1 isn't installed then the tool to remove the SP1 uninstall information should probably fail ;)

I've used RAID Reconstructor before with positive results, but it sounds like those drives might be very dead.

The other thought I had is whether SP1 was already slipstreamed onto the disk you installed from?

Does your machine have SP1 installed? (Right-click on my computer and choose "Properties")