Hah. We had a change of govt. Instead of Fibre to the Home, it's now to the Node. Speed has gone (way) down. Prices will go (way) up. Our glorious PM cannot see a reason for people to have that sort of connectivity.
Actually the cynic in me says that a lot of telco businesses who are paid up contributors to the Liberal party are not happy with the previous govt. business model so...
Having a friend who works at a small regional ISP (he works in the provisioning dept), the whole mess is a lot worse than most people realise. (This is Gold Coast centric but will apply to most regional towns).
As we know most exchanges in Australia are fibre connected (most have multiple 1Gbps or a 10Gbps link as these need to handle both voice and data and mobile in most cases), with connections between the exchange and RIM being a mix of copper and fibre. The current plan to change the copper between the exchange and RIM to be fibre to help reduce latency and contention. If you're in an area that is either off a RIM or Exchange and your area gets on average less than 10Mbps ADSL service (that is you're not within 2km of your local DSLAM) you *should* get our own mini-exchange or ADSL2+/VDSL enabled RIM to boost you connection to a minimum of 12Mbps. (The connection point at the end of the street is a load of BS, it's more like a connection point in every 5-20 streets, as the line limit being touted as allowed/compliant is a maximum of 700m).
But the copper between the RIM/Exchange and your premise will not be changed, and from my friends reports the majority of cabling issues are either:
1. In the home.
2. Between the home and the local pit in the street. (This is where a contractor working for Telstra f*&(ked up your connection while working on someone else's in the street).
3. Or at the exchange. (see point 2).
The coalitions plan does not address where the main faults will lie, so maintenance expenses will not change greatly.
Now think about this, the coalitions technology of choice is VDSL2, which can get 100Mbps provided you are close enough and have good copper... Yes, if you close enough, then you can get 100Mbps, as but Time, Tannin, Tea and LiamC will tell you, the standard of copper installation in Australia ranges from below average to really crap...
And, some ISPs are now offering, that if you have FttN and want FttP, then they will do it, but they will pass on the cost of the fibre installation to the customer... the expected average cost for this to happen in the suburbs, between $1K and $5K for installation only... (Some ISPs will subsidise that cost, but only with a long term contract). My friends ISP has a customer in Willow Vale, a small country suburb in the north Gold Coast area. (Most homes are on acreage, a very nice area). He wanted NBN/fibre, and got a quote on the fibre installation - to lay fibre between the exchange and his home was quoted at just under $15K... (They have a ADSL1 service currently and get just on 3Mbps connection).
Yes, the NBN now sucks...
PS. I'm on a ADSL2+ plan with 60GB allowance, for $50pm. At the moment, my average connection is 9Mbps/1Mbps, which the speed tends to drop during storms but that's another matter...
PPS. Anyone else played with iiNet's BOB2? What are you thoughts on it?