Why motherboards don't have two CPU fan connectors?

CougTek

CougTek

Hairy Aussie
Joined
Jan 21, 2002
Messages
8,729
Location
Québec, Québec
I'm pissed. My dream of building the perfect computer cannot be realised. I cannot find a motherboard, ideally a reasonnably-priced motherboard, with two 4-pins CPU fan connectors. Why do I need this? Well, the most efficient coolers on the market need two fans in order to achieve top performance while maintaining a tolerable noise livel (ie - being almost inaudible).

Let's say I want to install a Prolimatech Armagedon with two Blue Vortex 14 140mm fans. I can't. Well, I can, but I need to connect one in the CPU fan connector and the other one in the chassis/system fan connector, so they won't rotate at the same speed. Two fans on the same heatsink need to rotate at the same speed to achieve optimum results and not develop an anoying tonal distortion noise.

So I'm pissed. Quite pissed.
 
CougTek

CougTek

Hairy Aussie
Joined
Jan 21, 2002
Messages
8,729
Location
Québec, Québec
Howell said:
Why not use a splitter? I'm pretty sure I have one to give you. I'll check this weekend.
Click to expand...
Thanks, but the shipping from Tennessee to the Great White North would be more expensive than the part itself. Thanks for the suggestion though.

There must be places closer than UK that sell that splitter.
 
LunarMist

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
I found a 4-pin fan splitter in a shop once. They should be more common though.
 
LunarMist

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
Is this for a personal machine? If so why not just cut and splice the wires?
 
CougTek

CougTek

Hairy Aussie
Joined
Jan 21, 2002
Messages
8,729
Location
Québec, Québec
It's not only for a personal build. I have a few customers who want silent yet powerful computers and having two CPU fans could help achieve that.
 
B

BingBangBop

Storage is cool
Joined
Nov 15, 2009
Messages
667
The first two pins is for power and ground. The 3rd pin is the tach. The forth pin is to control the speed.
 
Mercutio

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
I vaguely recall seeing little fan control devices made to sit in a 3.5" drive bay last time I actually visited my local parts distributor in person.
 
LunarMist

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
When I was looking for a splitter last year I found that the fan controls had no more than 3-pin connector as far as I could determine. I use the second speed controlled fan on the case exhaust to increase airflow when the CPU is under load rather than for a second CPU fan. Strangely there was only one of the 4-pin splitter in stock and it was from an oddball supplier.
 
Bozo

Bozo

Storage? I am Storage!
Joined
Feb 12, 2002
Messages
4,396
Location
Twilight Zone
Case Rant: for the past 12 years or so, 99% of all the cases I have used have been Antec. When a computer is due to be replaced usually I reuse the case. Yesterday I was refiting an older Antec case and needed two more motherboard standoffs. I reached into my bag of screws and picked up two standoffs. They were different inside thread than the originals. As I looked for the correct standoffs, I found two different hights, two different inside threads, and three different outside diameters. WTF! You would think they would all be the same.
Antec also uses rails to install periferals. I found 5 different sizes/types of rails for the Antec cases. :frusty:
This is bullshit.
 
CougTek

CougTek

Hairy Aussie
Joined
Jan 21, 2002
Messages
8,729
Location
Québec, Québec
LunarMist said:
The cable I have is roughly like this one.
Click to expand...
Yep, that's what I need. Thanks. It would be simpler it the additionnal header was directly on the motherboard though.

And I agree with Bozo that both drive rails and motherboard standoffs should be standard for enclosures of the same company.
 
T

time

Storage? I am Storage!
Joined
Jan 18, 2002
Messages
4,932
Location
Brisbane, Oz
Antec isn't a manufacturer, so it's not surprising that their products from various OEMs use various fittings.

Eventually, this all changes anyway. Drive rails? Now that takes me back.
 
Clocker

Clocker

Storage? I am Storage!
Joined
Jan 14, 2002
Messages
3,554
Location
USA
If you're splitting off a motherboard header, make sure you confirm it's rated for the total amperage you'll be pulling through it.
 
LunarMist

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
The power is from the Molex connector, not the mainboard.
 
Adcadet

Adcadet

Storage Freak
Joined
Jan 14, 2002
Messages
1,861
Location
44.8, -91.5
Mercutio said:
I vaguely recall seeing little fan control devices made to sit in a 3.5" drive bay last time I actually visited my local parts distributor in person.
Click to expand...

I have a Scythe Kaze master something or other. It gives me up to 6 temperature readouts and 6 manual fan controls. Temperature readouts are interesting to peek at now and them when I'm doing something intense with my computer, but not really useful. I almost never adjust fan speed as I set all my fans to the highest speed and it's still relatively quiet. I have two fans on my CPU's HSF, and one fan is controlled by the motherboard and defaults to low speed. If I were looking to save $40 on my next build, this is probably the item I'd drop first.

http://www.scythe-usa.com/product/acc/028/km01_detail.html
 
LunarMist

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
17,497
Location
USA
Bozo said:
Is there a tach feed back to the motherboard? Most motherboards won't run unless it sees that the CPU fan is running.
Click to expand...

There is one connector for the motherboard CPU fan header, one for the power in and two (or three for the splitter shown) sockets for the 4-pin fans. Only one of the fans is actually supplying the tach back to the MB, and it is typically labeled as such.
 
Bozo

Bozo

Storage? I am Storage!
Joined
Feb 12, 2002
Messages
4,396
Location
Twilight Zone
One more motherboard rant: Who is the stupid bastard that decided SATA connectors should face the front of the case? This person should have his/her intrails pulled out through their ass.
 
Mercutio

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
Bozo said:
One more motherboard rant: Who is the stupid bastard that decided SATA connectors should face the front of the case? This person should have his/her intrails pulled out through their ass.
Click to expand...

Buy a full-length video card and see how quickly you change your mind. I just go ahead and plug in a couple extra SATA cables when I see that I have ports parallel to the board.
 
You must log in or register to reply here.
Top