My new system

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,742
Location
Horsens, Denmark
The article mentions a PCI slot fan. Any help there??

I upgraded the PCI slot fan to Antec's larger (2-slot) multi-speed variant. It actually makes very little difference in the HDD temps whether it is on high or low (even though the air out the back is significantly higher). This leads me to believe that I need better air control rather than just more air.
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
There's a great deal of talk, in Newegg's reviews of the Aria case, of having to mod for airflow.

You might also want to swap out 750GB drives for something slightly more reasonable, perhaps more single-platter-ish.
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,742
Location
Horsens, Denmark
I've done a number of mods to the Aria already; mainly in the PSU, but also in the rear exhaust area. Now I think I need to open up the front to encourage air past the hard drives.

I assume from the nature of the comments so far that 40C is too hot for HDDs?
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,742
Location
Horsens, Denmark
Also, Going to anything less than the 750s isn't really an option; I only have about 150GB free. I'm actually thinking I might need a third in there if I can swing it.
 

Computer Generated Baby

Learning Storage Performance
Joined
Dec 16, 2003
Messages
221
Location
Virtualworld
Buck said:
I'm itching to assemble a dual Intel Xeon 5160P system. Alas, those buggers are expensive.

I've recently played around with a new 2-U Dell server that was configured with a pair of top-of-the-line 3.0 GHz Xeon 5160 (Core2 "Woodcrest") processors and 4 GB od system RAM (FB-DDR2 RAM). I exercised it by re-loading Windows 2003/R2, then generating huge text files through file concatenation commands. In very little time I could generate 4 or 5 GB text files. Then, to test the array throughput, I copied these large text files on its internal RAID-1 SAS (Maxtor 10kRPM 73GB) array.

Summing it up: At times it was fast, at other times it was even faster than just plain fast. It even booted up fast.




 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
.... it obviously wasn't a domain controller then.

Playing with an E6300. Using the sucky stock cooling, I've taken it from 1.83GHz to 3.2GHz. It doesn't have much in the way of software loaded on it, but it's happily running 3DPipes and not overheating.
 

Adcadet

Storage Freak
Joined
Jan 14, 2002
Messages
1,861
Location
44.8, -91.5
.... it obviously wasn't a domain controller then.

Playing with an E6300. Using the sucky stock cooling, I've taken it from 1.83GHz to 3.2GHz. It doesn't have much in the way of software loaded on it, but it's happily running 3DPipes and not overheating.

What motherboard?
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
AD: It's an EVGA nVidia 590-based something-or-other. It was a $200 board.
Not worth $200 in my opinion but I guess it's nice enough.

I put it to work converting 26GBs of AAC files to MP3. It crashed after about an hour of work, though I have to admit I wasn't paying too much attention to it by that point.
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
Nope.
The specs make promises that the shipping weight can't deliver.

Enermax, Antec, Seasonic, Sparkle, Vantec, HEC/AGI.
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
Someone asked me today, and of course I don't know...
How loud ARE the new nVidia 8800 cooling solutions?

As a point of reference, I've used X1800s and X1900XTXs, and they are basically the same noise level as a 7900GS, which is the only new-ish discrete nVidia hardware I've had any contact with.
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
FSP is Sparkle. Sparkle PSUs are reasonably reliable but they are LOUD.
Newegg usually put FSP power supplies in the Foxconn cases it sells.
 

Adcadet

Storage Freak
Joined
Jan 14, 2002
Messages
1,861
Location
44.8, -91.5

Buck

Storage? I am Storage!
Joined
Feb 22, 2002
Messages
4,514
Location
Blurry.
Website
www.hlmcompany.com
Is the Antec NeoHE worth the extra money for my future Core 2 Duo system? I won't be running any SLI, and likely never more than 4 HDs in it so I'm guessing anything over 350W (if that much) is wasted. I would like a quiet system, and this will all be going in an Antec P180 case. But the budget is pretty tight.

The Antec NeoHE is a very nice PSU. If less wattage is acceptable, as would seem for your system, the Zalman ZM360B-APS is a very nice option.
 

Adcadet

Storage Freak
Joined
Jan 14, 2002
Messages
1,861
Location
44.8, -91.5
The Antec NeoHE is a very nice PSU. If less wattage is acceptable, as would seem for your system, the Zalman ZM360B-APS is a very nice option.
At $99 I think the Zalman is too expensive for me. I'd love a Seasonic M12, but they're ~$130. I'm going for respectable but inexpensive. $50 for a NeoHE vs. $35 for a FSG. Any other suggestions?
 

fb

Storage is cool
Joined
Jan 31, 2003
Messages
728
Location
Östersund, Sweden
I would go with the Antec... I only have experience with the older 480 NeoPower but it was reasonably quiet and OK in every way until the day it died.
 

Bozo

Storage? I am Storage!
Joined
Feb 12, 2002
Messages
4,396
Location
Twilight Zone
I'd go with the Antec. The removable cables make it worthwhile. Just plug in what you need.
The 5 or 6 I have installed were very quiet.

Bozo :joker:
 

Buck

Storage? I am Storage!
Joined
Feb 22, 2002
Messages
4,514
Location
Blurry.
Website
www.hlmcompany.com
At $99 I think the Zalman is too expensive for me. I'd love a Seasonic M12, but they're ~$130. I'm going for respectable but inexpensive. $50 for a NeoHE vs. $35 for a FSG. Any other suggestions?

The Zalman ZM360B-APS is $99.00! Wow! Then I would go with the Antec.
[size=-2]Although I know someone who has the ZM360B-APS for far less than $99.00 <cough>[/size]
 

time

Storage? I am Storage!
Joined
Jan 18, 2002
Messages
4,932
Location
Brisbane, Oz
In general, power supplies with 8cm fans are likely to be noisy. Most of the ones that aren't will probably fail prematurely, or provide insufficient airflow to cool your case (the PS is still the primary exhaust for the CPU).

Okay, so I exaggerated slightly, but a dose of reality seems appropriate in this era of 700W power supplies. :roll:

FSP is a large OEM with a wide range of products - not just the cheapos that bob up in Merc's Foxconn cases. They have been a contract manufacturer for many well-known brands, including Zalman and Antec.

If you look further on NewEgg, you will see FSP power supplies with 12cm fans, and these are indeed quiet, albeit more expensive. You will also notice that most FSP products get 5 eggs from customers, as opposed to say, Antec ...

Having said that, I note that NewEgg's offerings exclude PFC. I can buy FSP with PFC for less in Oz.

This is a recommendation, by the way. ;)
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
I'm looking at the pile of parts that's going to make up the guts of my new home theater system, and I am annoyed.

It's my first personal Intel desktop in eight years.

E6400 (not overclocked)
4GB of Corsair DDR2/800
Gigabyte motherboard (the one with 8 SATA ports!)
Auzentech X-Meridian
4TB of hard disks in softRAID0 (the data is backed up elsewhere) and because + boot drive (200GB Samsung PATA)
Internal 20x NEC DVD Burner
External HD-DVD drive (made for an Xbox360, and the only part that'll show out of its cabinet).

Here's the problem(s): I want HDCP support, so I can use the HDDVD to, you know, watch movies. Gonna have to pick a new video card for it. Games *sometimes* get played on the big screen and/or projector. I might play more on it if it had a better video card.

I just can't decide if it's actually worth it.

The second problem is that I probably ought to install Vista on something. I need to really learn Vista and this is one of the machines that I will use the most.
 

Handruin

Administrator
Joined
Jan 13, 2002
Messages
13,931
Location
USA
You'll probably vomit at this suggestion... Why not just get an xbox 360 with the HD-DVD drive? You can watch the movies, play games, download content, share content from your home PC, and eventually they'll be linking IPTV and HDMI into the newer units. It might save you some money...but that's just a guess without looking up what your parts will cost.
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,742
Location
Horsens, Denmark
You'll probably vomit at this suggestion... Why not just get an xbox 360 with the HD-DVD drive? You can watch the movies, play games, download content, share content from your home PC, and eventually they'll be linking IPTV and HDMI into the newer units. It might save you some money...but that's just a guess without looking up what your parts will cost.

That is the cheapest soltion to the immediate problem, but not the coolest or most flexible. Based on the existing system spec (looks great, BTW) the cost is not particularly relevant.

Let me know what you end up getting, looks very cool. What HDDs are you using in that array?
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
I had an xbox360 for a little while. I played the one game I wanted to play and then I sold it. I could not stand the controls on it. The reason I have the HDDVD drive made for Xbox is that it is substantially cheaper than a set-top HDDVD player.
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
ddrueding: Hitachi drives for now.
I installed an x1650 in my machine for now. I see that ATI's new chip will be available in a couple weeks. I'll re-evaluate my needs then.

I found an idiot who wants a Quad-Core PC, SLI GF8800s and Vista on the day its released. I'm guessing that will be a very... interesting build. Particularly the power requirements (600W? 700W?). Oh, and he wants it to be very quiet.
 

Adcadet

Storage Freak
Joined
Jan 14, 2002
Messages
1,861
Location
44.8, -91.5
What will that likely cost in parts, Merc?

Lets see...
- an nForce 680i board will run $250
- Core 2 Quad right now is $890
- DDR2 800 2x2 GB is $600 (you could save $100 by skipping CAS 5 in favor of CAS 6, but why would you)
- an nVidia 8800 cards at $400, and I'm assuming the guy doesn't want SLI
- he'll want a fancy smancy Creative audigy 4 pro for $270
- hard drives...I can only guess. Let's just say a WD Raptor 150 for $200 and a 500 GB Samsung for $150
- case...the Antec P190. No idea how much they'll cost, but lets just guess $150 at the least since P180s are usually in the low 100's
-I'm assuming he already has a flat panel monitor or three, so I'll leave those out
- Vista Ultimate is set to be $400 retail so lets say $200 for OEM

that comes to...$2510 in hardware plus OS.
 

Mercutio

Fatwah on Western Digital
Joined
Jan 17, 2002
Messages
22,297
Location
I am omnipresent
He wants SLI 8800GTXs - $1100 worth of video cards.
He's getting an Intel Board (forget the model) to PREVENT overclocking; I'm not going to support him if he's stupid enough to do it.
He's getting an X-Mystique for sound
And yes, he wants the Extreme Edition chip (Another $1000)

I'd NEVER put a WD hard disk in PC. He's getting a pair of 320GB Seagate drives in RAID1 and a pair of 400GB Samsung drives in RAID0; he'll be over 1TB for bragging purposes but nothing as insane as installing a WD drive.

He wants a super-ugly Cooler Master mista... I mean mid-tower for everything. I'm probably going to use an Antec or possibly a Lian Li case instead. I'll tell him his video cards didn't fit or something.
 
Top