Cool system build

MaxBurn

Storage Is My Life
Joined
Jan 20, 2004
Messages
3,245
Location
SC
Real Temp does look good, throws in the GPU temp too which is nice.
 

sechs

Storage? I am Storage!
Joined
Feb 1, 2003
Messages
4,709
Location
Left Coast
Another interesting observation. I have the MB set to dynamically adjust the CPU fan speed, and it is keeping the CPU at 86C. If I turn up the chassis fans, it slows down the CPU fan. At present it is under 2000RPM.
Is this a big deal?
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,522
Location
Horsens, Denmark
I don't think so. I mean, the Intel guys must know what they are doing. The chip and the board are rated to 100C+, so I guess we'll find out.
 

Santilli

Hairy Aussie
Joined
Jan 27, 2002
Messages
5,078
Unless it's an Extreme processor, OCing is going to require putting something other then the cpu out of spec. 3.51Ghz is a pretty serious overclock. I'm not surprised it screwed with the drives, and ram.

Also, the ram used in these non-enterprise motherboards seems to be less quality controlled then that used in servers, and, when you start getting up around 8 gigs, or more, seems like stuff starts happening.

IIRC the ram in the Beast is rated for 1333, but, only runs stable at 1066MHZ. 12 gigs, 1066 MHz is not really noticeable vs 1333 MHz when it was running.

But, you all know that.
 

Stereodude

Not really a
Joined
Jan 22, 2002
Messages
10,865
Location
Michigan
I don't think so. I mean, the Intel guys must know what they are doing. The chip and the board are rated to 100C+, so I guess we'll find out.
:skepo: I'm sure they couldn't possibly have an interest in your CPU not lasting as long as it could given that they make their money selling chips. :rofl:
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,522
Location
Horsens, Denmark
Interestingly enough, my new rig is running the CPU at 41C using a cheap-ish ZeroTherm cooler. I also have some Zalman CNPS9900NT coolers here that I might play with.
 

time

Storage? I am Storage!
Joined
Jan 18, 2002
Messages
4,932
Location
Brisbane, Oz
Win7 seems to think this is a well balanced system, scoring 7.4 across the board (except for storage; 7.9)/

3 1/2 months on, I'm getting 7.4/7.6 for CPU/Memory with an i5 2400 at default settings. AMD 6850 graphics is hitting 7.7/7.7. Only a 120GB Sandforce is letting down the side with a meager 5.9.
 

CougTek

Hairy Aussie
Joined
Jan 21, 2002
Messages
8,726
Location
Québec, Québec
Only a 120GB Sandforce is letting down the side with a meager 5.9.
That's the score I get with mecanical hard drives (not Raptor, plain WD Caviar Blue and vanilla Seagate 7.2K rpm). What's wrong with the scoring?
 
Last edited:

time

Storage? I am Storage!
Joined
Jan 18, 2002
Messages
4,932
Location
Brisbane, Oz
Dunno, any ideas? Msinfo32 seems to indicate it's aligned; should the block size be bigger or something?
 

LunarMist

I can't believe I'm a Fixture
Joined
Feb 1, 2003
Messages
16,665
Location
USA
SandStorm benchmarks are mostly a cheat due to compression and inconsistent at that.
 

Handruin

Administrator
Joined
Jan 13, 2002
Messages
13,741
Location
USA

Why the hell is that motherboard so expensive!? I could build an entire computer for the price of that motherboard. :-D
 

Handruin

Administrator
Joined
Jan 13, 2002
Messages
13,741
Location
USA
Neat...do you think either of them are worth the money? I know your clients are rockin' the bill...just curious if you think they're worth it. I'm surprised they didn't swing for the 980X or 990X since they're going over the top anyway. Given the $10 price difference I don't know why anyone would buy the 980 over the 990 when you're already spending a truck load of cash like that.
 

BingBangBop

Storage is cool
Joined
Nov 15, 2009
Messages
667
I think if I could wait, I'd go for for the triple-channel Sandy Bridge motherboards with the hex-core sandy bridge i7 processors. It won't be any cheaper, but it will undoubtedly out perform the best of the current generation i7's by quite a ways.
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,522
Location
Horsens, Denmark
B3,

Your post basically says "computers that aren't available now will be faster than the ones that are". While I agree, it isn't particularly...novel ;)
 

Handruin

Administrator
Joined
Jan 13, 2002
Messages
13,741
Location
USA
The triple channel hexa-core-wonder Sandy Bridge would be my next consideration...some day.
 

BingBangBop

Storage is cool
Joined
Nov 15, 2009
Messages
667
B3,

Your post basically says "computers that aren't available now will be faster than the ones that are". While I agree, it isn't particularly...novel ;)

Yes, but we really are talking 1-2 months till they are expected which isn't a long time. They were supposed to be out in March of 2011 but I anticipate that because of the problem with the Sandy Bridge chipsets they will be delayed a little longer. I think it would be worth the wait...
 

LiamC

Storage Is My Life
Joined
Feb 7, 2002
Messages
2,016
Location
Canberra
I thought the triple channel Sandy Bridge chips needed the new high-end, 2011 or so pin socket, which AFAIK wasn't due to Q4 this year
 

time

Storage? I am Storage!
Joined
Jan 18, 2002
Messages
4,932
Location
Brisbane, Oz
Wikipedia says LiamC is correct, although the roadmap also shows it may be 1st quarter 2012 ...
 

Gilbo

Storage is cool
Joined
Aug 19, 2004
Messages
742
Location
Ottawa, ON
Are the socket 2011 chips going to be quad-channel?

The Xeon E-5's might be, and they share a 2011-pin socket (probably tilted at 90 degrees from the consumer version like the current generation). Intel's demoing with 8 GB of RAM, which isn't a triple channel number...
 

ddrueding

Fixture
Joined
Feb 4, 2002
Messages
19,522
Location
Horsens, Denmark
Another hardcore build. Wishing for newer hex-core CPUs.

The user plans to run 3 30" 2560x1440 monitors. What video card would you recommend? Here is the rest of the system:

Intel Core i7-980 3.33GHz LGA 1366 130W
GIGABYTE GA-X58A-UD3R ATX Intel
CORSAIR Vengeance 24GB (6 x 4GB)
OCZ RevoDrive 3 series RVD3-FHPX4-480G
2x HITACHI Deskstar 3TB 3.5" SATA 6.0Gb/s (RAID-1)
LITE-ON Black 12X Blu-ray Burner with Blu-ray 3D feature SATA

Case selection depends on the space in the desk, I'll be getting dimensions soon.

I'm still amazed that an "uber" build can be had for under $4k, not that the customer will be paying less than $5k...;)
 

Handruin

Administrator
Joined
Jan 13, 2002
Messages
13,741
Location
USA
Wow, more than 1/4 of the price is for that RevoDrive 3. Looks like a nice machine. I also hope Ivy Bridge has some hex-core CPUs to offer in Q1 2012. Have you had any prior experience with those 3TB Hitachi drives? My 1TB Samsung drives are near capacity and I'm looking to add some more drives to my desktop. Those are the ones on my list.
 

CougTek

Hairy Aussie
Joined
Jan 21, 2002
Messages
8,726
Location
Québec, Québec
The user plans to run 3 30" 2560x1440 monitors. What video card would you recommend?
Those X2-6870 cards represent a nice value in the high-end segment. Will he be gaming in that system? If it's for CAD, then he'll need a bad-ass Quadro (like a Quadro 4000).

Of course, no graphic card or probably even no combination of graphic cards will be able to play games like Crysis 2 or Metro 2033 on 3x 2560x1440 screens. 1x 2560x1440 is already tough enough.
 
Last edited:
Top